Surfapore W

$45.20
  • 1L
  • 4L
  • 30L
SKU: 151
Coverage: 

Estimated coverage is 8-10m2 per litre, strongly dependent upon the absorptive properties of the surface.

Water and oil wood repellant

How It Works: 

SurfaPore W consists of three types of differently sized nanoparticles, each with its own purpose. The smaller nanoparticles penetrate the capillaries and bond with the hydroxyl groups of the cellulose content to provide long-term protection against water ingression. The second group of nanoparticles penetrates the appropriate depth to react with organic resins that reside in the wood.  The third type is a nano-emulsion of paraffin that ensures enduring surface protection.

Surface Description: 

Water and oil wood repellant

General Characteristics: 

SurfaPore W is a water-based nanomaterial specifically designed to protect and preserve absorptive wood without changing its natural appearance.  At the same time it allows it to silver naturally.  Because moisture cannot penetrate the wooden surface dimensional stability and protection against decay are achieved. This Nano sized barrier is vapour permeable and allows equilibrium between the timber and the ambient atmosphere that minimizes shrinking and expansion and thereby reduces warping and cracking.  The lack of residual moisture virtually eliminates mould, mildew and lichens from growing, preventing decay.  The life of the timber is extended.

Benefits: 
  • Creates a breathable moisture barrier to prevent swelling
  • Reduces warping and cracking
  • Reduces or eliminates mould, mildew and decay
  • Preserves structural integrity
  • Allows natural silvering
  • Used as a primer or as an exterior protective coating
  • Is NOT affected by UV
  • Completely safe and environmentally friendly
  • Made from low V.O.C. and sustainable materials
Applications: 

Decking, exterior cladding, structural timbers, pre-treatment protective coating for finished wood products, pre-treatment of manufactured wood shavings or particles.  Can be used in conjunction with oil based stains and mixed with water based primers.

How to Apply: 

Surface should be dry and clean. Apply with brush, roller, by spraying or dipping. Do not dilute. Allow SurfaPore W to soak for at least 30 seconds or until wood is no longer absorptive. Use second coat only if wood remains absorptive. Remove excess by wiping with a soft rag. Leaving excess to dry might result in a tacky surface, which can be removed with hot water. Maximum water protection is achieved after 24 hrs. Recommended application temperature is above 5°C.