Pacific Nanotech
Nano Guard CL50
Nano Guard CL50
Couldn't load pickup availability
Nano Guard CL50 is a water based formulation that removes slight mineral deposits and silicone and wax from glass surfaces. It is also the recommended surface preparation for Nanotechnology treatment NG1010. The low level of chemicals and the use of mostly plant extracts, give the CL 50 an outstanding sustainable rating.
How It Works
Nano Guard CL50 is a water based formulation that uses the same technology as the semi-conductor industry to deeply cleanse surfaces down to the micro structural surface. With the same easy application CL50 cleans and activates the bonding abilities of the glass substrate to the nano scale, thereby dramatically improving the performance and durability of nano coatings.
Applications
- Glass
- Ceramic
- Sanitary Surfaces
- Recommended for the surface cleaning and preparation of glass prior to application of Nano glass coatings
Benefits:
- Very abrasive , without scratching glass
- Water based products
- Economical, high coverage rates
- Removes concrete and render stains
- Mineral deposits and run down marks from sealant, soap scum
- Easy to remove residue
- Can be used with suitable polishing machines and pads.
- Removes conventional hydrophobic glass coatings.
- Water based
- Environmentally friendly
- Excellent cleaning solution
- Economical
- Outstanding coverage rate
How to Apply:
- Shake container well, before applying CL 40 to a clean microfibre cloth or a sponge. Clean the surface with circular motions.
- Polish off the product. Remove all cleaning residue with clean water.
- In hot conditions, we recommend to spray some water on to the substrate, and apply the product on the wet surface.
- Application temperature: + 5 °C to +30°C/41 to 86°F.
- Do not apply or mix together with chlorinated cleaning agents.
Coverage
Consumption approximately 10- 25 ml per square metre
Coverage rates are a guide line only
